Are you shopping for the best Tpa3116 Bluetooth? We have evaluated and analyzed categorically more than 10 150 customer reviews, and we have come up with the 10 best products you will have an interest in, including Tpa3116 Bluetooth. Plus, the features that make every item stand out from the crowd are highlighted, with a view to save your valuable time.
Best Tpa3116 Bluetooth
- This is a DC12-24V single power supply, using TI's TPA3116D2 high-performance digital power amplifier chip as the core, can support 50W (left channel) + 50W (right channel) dual channel output.
- Support Bluetooth audio receiver, with an external audio input interface, bass, midrange, high pitch tri-tone tone potentiometer, function control switch / volume adjustment potentiometer.
- Wide operating voltage, power saving design, efficiency up to 90%. Can use a good switching power supply, laptop switching power supply, you can also use the charge bottle, or car power supply and so on
- The board is a finished board that has been soldered and tested. Connect the speaker box according to the diagram, connect a suitable power supply, connect a Bluetooth audio device, or connect the correct audio input.
- Power on: Default Bluetooth mode, waiting for Bluetooth audio device connection,Source input player: Bluetooth disconnected state --> Press volume potentiometer switch --> Switch to source input mode
- CHIP: DUAL TPA3116 HIFI Chip with AM Interference Suppression Function, 100W*2 Output Power
- WIDE INPUT VOLTAGE RANGE: DC 9V-24V with 5.5 * 2.1mm Interface, Laptop Power Supply Is a Good Choice
- BLUETOOTH & AUX INPUT:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the 3.5MM Headphone (Line in) Way
- PROTECTIVE FUNCTION:Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection, This means that the Bluetooth amplifier board is not easily damaged
- TIP: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance horns will have different output power.In the case of sufficient voltage and current, the larger the impedance horn, the smaller the relative sound power, please pay attention!
- Small simple compact design but practical and powerful, little Hi-Fi Bluetooth wireless amplifier exclusively designed for the customers who pursue HiFi sound;
- Bluetooth 5.0 core, up to 50ft connection range guarantees low signal delay. No pop, no audible noise when Bluetooth connection is established;
- 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers, (For passive speakers only, not the powered speakers.)
- Advanced circuitry design, built-in speakers protection circuit, best for bookshelf/computer/desktop/speakers in your home;
- Home integrated digital amplifier, 18-month warranty, you can return the item if you have any problems;
- Make your home audio speakers more powerful;
- Bluetooth 5.0 wireless streaming range up to 50ft(15m), with bass and treble control, Simple compact design but practical and powerful, Adopt TI TPA3116D2 chip to get clear and clarity sound, no audible noise, dead silent when nothing is playing through it.
- Advanced circuitry design, built-in speakers protection circuit, best for bookshelf/computer/desktop/speakers in your home.
- Home Hi-Fi integrated amplifier, Exclusively designed for the customers who pursue HiFi sound; Ship with power adapter and power cord, you can use directly.
- Perfectly suited for your desktop or a smaller space in your home or office, Aluminum shell to sure high quality, 18-month warranty, you can return the item if you have any problems.
- TPA3116D2 HIFI Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 12-24V
- Treble & Bass Control: If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater.
- Bluetooth & AUX Input: Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.
- HIFI USB Sound Card Mode & U Disk Mode: When playing in these two ways, you only need to connect the AMP to the computer via a USB cable without any driver. When playing music in U disk mode, you only need to pay attention to the FAT32 format U disk, and the U disk capacity does not exceed 32GB.
- Note: The Bluetooth power amplifier does not come with a DC power adapter, please make sure you have a suitable power adapter before purchase, 12V -24V DC power adapter can be used, 24V 5A is recommended.
- TPA3116 Dual 2 * 50W channel, high efficiency and low temperature, applicable Speaker impedance: 4,6,8 Ohm
- Audio input: 1. Bluetooth audio reception 2. USB playback decoding 3. TF card decoding decoding support playback formats: MP3, WMA, WAV, FLAC;
- This Bluetooth audio receiver card is capable of giving your stereo / home Bluetooth amplifier functionality, only a simple operation can be converted to wireless audio.
- Power supply: 24V DC / 3A; Size: 85mm x 52mm
- Other features: with FM Radio, remote control for receiver (infrared mode)
- 【High Fidelity HIFI Sound】Adopt imported TPA3116D2 chips, with excellent power amplifier effect. the distortion is less than 0.1% even at high power output. modulation frequency up to 1.2MHZ， built-in LC filter capacitor to make the vocals clearer.
- 【Parameters】Input Voltage: DC 12V-24V；Max Power Output: 50W*2（R&L）+100W（Subwoofer）；Input Method: Bluetooth & AUX；Channel: 2.1 CH Stereo Output；Output Impedance：4-8Ω ；Bluetooth Version：BT 5.0
- 【AUX & Bluetooth Input】 Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.
- 【Protect Function】This Amp Board Has Overheat Protection, Reverse protection, Circuit Protection, Over-voltage and Under-voltage Protection
- 【After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time.
- tpa3116 amplifier 100W Subwoofer Amplifier Board;Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz
- tpa3116 2x50w amplifier board Operating voltage range: DC 12-24V(maximum voltage is no more than 24V); built-in TPA3116 amplifier chip;This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.
- bluetooth amplifer board DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output
- Audio input sensitivity: 500 mv;Speaker impedance: bass speaker impedance: 2-8 ohm
- You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power diy amplifier
- Hifi digital class D micro AMP
- Bluetooth 5.0: more stable and faster wireless transmission with less losses.
- TPA3116D2 Chip, output power: 50W * 2, voltage input: DC 5V-27V, Adapter speaker 4-8Ω
- Two input ways: BT 5.0 and 3.5mm AUX input.
- Very powerful and clear Sound. No background noise and pop.
- This is a amplifier with Bluetooth 4.2, front amplifier, bass divider processing amplifier board. With bass, left and right channel volume adjustment, treble adjustment, total volume potentiometer control 2.1 power amplifier board.
- Use DC power 12-24V, maximum support 50W (left channel) + 50W (right channel) + 100W (bass channel) three-channel output.
- Using TPA3116D2 high-performance digital power amplifier chip as the core. A parallel bridge to do the subwoofer output, the other to do the left and right channel output.
- Wide operating voltage, power-saving design, the efficiency of up to 90% or more. You can use a good performance of the switching power supply, laptop switching power supply, you can also use the car power and so on.
- Boot anti-shock protection design, start no POP burst sound.
Commonly, the budget is one of the primary thoughts you carefully think about when shopping for brand new things before anything else. Many brands supply numerous Tpa3116 Bluetooth at different prices. for the most part, costly products have additional and special characteristics. But you can always buy the product that suits you financially and fits your needs.
Highparkqc.com always attempts to keep the most up-to-date instruction. We do not sell any products or services directly. The details on our web page are for reference only and may vary from what you see when visiting the service supplier and the website of the actual product.
Highparkqc.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees (at no cost to you) by linking to Amazon.com. Thank you for using our links.